NOKIA BTS RESET BUTTON
FSMF & AIRSCALE
ASIA,ASIB,ASIK
To enable the Extension FSMF to operate in this role it will
need a configuration reset.
The configuration reset deletes any existing configuration data and withdraws the Master System Module role.
The process is performed with the Configuration Reset button located on the underside of the EIF1 port of the FSMF:
v Reset button is located next to the EIF1 interface. Press reset button for 5 seconds to clear configuration data. Manual reset is required afterwards for changes to take effect.
Air Scale common plug-in units reset and service buttons
The buttons reset the BTS, the configuration, or restart the
BTS in a fail safe mode
You can use the reset and service buttons on Nokia Air Scale
common plug-in units in
Case the remote connection is not possible
The buttons reset the BTS, the configuration, or restart the BTS in a fail safe
ASIA unit have front-accessible service and reset button
available. Pressing the reset button for 5 seconds will result in clearing
configuration data. Manual reset is required afterwards for changes to take
effect.
ASIB unit have front-accessible service and reset button available. Pressing the reset button for 5 seconds will result in clearing configuration data. Manual reset is required afterwards for changes to take effect
ASIK unit have front-accessible service and reset button
available. Pressing the reset button for 5 seconds will result in clearing
configuration data. Manual reset is required afterwards for changes to take
effect.
Comments
Post a Comment